Menü
C-Mount Anschluss
Max. Bildkreis 1/1.1
Monochrom-Kamera
Die Basler a2A4504-5gmBAS GigE-Kamera mit dem Sony IMX541 CMOS-Sensor liefert 5 Bilder pro Sekunde bei 20.2 MP Auflösung.
Stromversorgung: PoE oder 12-24 VDC
GigE
| Allgemeine Information | a2A4504-5gmBAS | |
|---|---|---|
| Produktlinie | ace 2 Basic | |
| Sensor | ||
| Sensorhersteller | Sony | |
| Sensor | IMX541 | |
| Shutter-Technologie | Global Shutter | |
| Sensorformat | 1.1 | |
| Sensortypen | CMOS | |
| Sensorgröße | 12,3 mm x 12,3 mm | |
| Auflösung (HxV) | 4504 px x 4504 px | |
| Auflösung | 20.2 MP | |
| Pixelgröße (H x V) | 2,74 µm x 2,74 µm | |
| Bildrate | 5 fps | |
| Mono/Farbe | Mono | |
| EMVA-Daten | ||
| Quanteneffizienz (typisch) | 66,20 % | |
| Dark Noise (typisch) | 2,2 e¯ | |
| Saturation Capacity (typisch) | 9,7 ke¯ | |
| Dynamikbereich (typisch) | 70,9 dB | |
| Signal-Rausch-Verhältnis (typisch) | 39,9 dB | |
| Kameradaten | ||
| Schnittstelle | GigE | |
| Pixel Bit Depth | 8/10/12 bits | |
| Synchronisierung | free-run | |
| hardware trigger | ||
| software trigger | ||
| Belichtungssteuerung | programmable via the camera API | |
| hardware trigger | ||
| Digitaler Input | 1 | |
| General Purpose I/O | 2 | |
| Stromversorgung | PoE or 12-24 VDC | |
| Leistung (typisch) | 3,5 W | |
| Bauform | ||
| Housing Typ | Box | |
| Größe (L x B x H) | 55,5 mm x 29 mm x 29 mm | |
| Objektivanschluss | C-mount | |
| Betriebstemperatur | -10°C – 60°C | |
| Gewicht (typisch) | 100g | |
| Konformität | ||
| Konformität | RoHS | |
| CE | ||
| IP30 | ||
| GigE Vision 2.0 | ||
| FCC | ||
| UL (in preparation) | ||
| GenICam | ||
| KC | ||
| EAC |
| Features | a2A4504-5gmBAS |
|---|---|
| Chunks | Auto Brightness Status |
| CRC Checksum | |
| Counter Value | |
| Exposure Time | |
| Frame ID | |
| Gain | |
| Line Status All | |
| Timestamp | |
| Timestamp Value | |
| Color Creation and Enhancement | Brightness and Contrast |
| Event Reporting | Action Late |
| Exposure End | |
| Frame Buffer Overrun | |
| Frame Start | |
| Frame Trigger Missed | |
| Overrun | |
| Temperature Status Changed | |
| Test | |
| GigE Vision 2.0 | Action Commands (Synchronous Triggering) |
| Precision Time Protocol (IEEE 1588) | |
| Scheduled Action Commands | |
| I/O Control | Input Filter |
| Image Acquisition Control | Acquisition Frame Rate |
| Acquisition Mode | |
| Acquisition Start, Stop, and Abort | |
| Acquisition Status | |
| Exposure Active Trigger | |
| Exposure End Trigger | |
| Exposure Start Trigger | |
| Frame Active Trigger | |
| Frame Burst Active Trigger | |
| Frame Burst End Trigger | |
| Frame Burst Start Trigger | |
| Frame End Trigger | |
| Frame Start Trigger | |
| High Speed Burst Mode | |
| Sensor Readout Time | |
| Trigger Delay | |
| Triggered by Hardware | |
| Triggered by Software | |
| Line Source Signals | Counter Active |
| Exposure Active | |
| Frame Burst Active | |
| Frame Burst Trigger Wait | |
| Frame Trigger Wait | |
| Serial Tx | |
| Timer 1 Active, Timer 2 Active | |
| User Output 1, 2, and 3 | |
| Miscellaneous | Device Information Parameters |
| Device Temperature | |
| Periodic Signal | |
| Temperature State | |
| User Sets (Configuration Sets) | |
| User-Defined Values | |
| Pixel Formats | Mono 12 |
| Mono 12p | |
| Mono 8 | |
| Standard Features | Auto Function Profile |
| Binning | |
| Black Level | |
| Center X and Center Y | |
| Counter | |
| Digital Shift | |
| Exposure Auto | |
| Exposure Mode: Timed | |
| Exposure Mode: Trigger Controlled | |
| Exposure Mode: Trigger Width | |
| Exposure Time | |
| Gain | |
| Gain Auto | |
| Gamma Correction | |
| Image ROI (Region of Interest) | |
| Lookup Table (LUT) | |
| Multiple ROI | |
| Reverse X (Horizontal Mirroring) | |
| Reverse Y (Vertical Mirroring) | |
| Test Patterns | |
| Timer |
